What is the Best Corded Drill for Woodworking ?

Best Corded Drill for Woodworking

If you need a typical drill to drill holes and insert screws, it would be wise to look for the best corded drill for woodworking. Fortunately, drills do not cost a lot of money at all, but at the same time, you would like to but one that is easy to use, gets the job done right and does not wear down over time.

In this review, we will look at three great drills for woodworking from Black + Decker, DeWalt and Porter-Cable. Each drill has a set of useful features, but they all have a nagging flaw that might affect your decision. So which is the best corded drill for woodworking? Read on to find out.

What to Know Before Buying the Corded Drill for Woodworking

Chuck Size

Corded drills commonly have one of two sizes for chucks: ⅜-inch and ½-inch. The latter is a lot wider, but in many cases the former will work just fine. ½-inch chucks are necessary for more power larger holes to drill, and drills with this size usually cost more.

Safety Features

Unlike other types of power tools, corded drills usually do not have many safety features, but that isn’t to say to try to be as reckless as possible when operating your corded drill. Be sure however, to follow basic safety procedures when handling corded drills.

  • Do not wear loose fitting clothing or loose jewelry.
  • When the drill is not in use, do not leave in plugged in.
  • Be sure to wear safety glasses so that sawdust and shrapnel does not fly into your face or eyes.
  • And as always, make sure to refer to the instructions manual that comes with your corded drill and follow any additional rules as stated by the manufacturer.

Some common features on corded drills for woodworking include a keyless chuck, a reversible toggle and a pistol grip. There are also advanced features that you might also happen to find in select drills, such as variable speed control, hammering action and fast and slow speed modes.

Drills also weigh differently and operate differently. A great drill is quiet when in use and vibrates minimally. A drill can be loud and vibrates roughly, too, but that isn’t really to say that it is a worse drill as a result. Loudness in a drill was at one point an indication of how much power a tool has, but this belief has gradually diminished with recent advancements in technology. Oftentimes, though, a quieter, smoother drill will result in one that will last longer.

Why you should consider a Corded Drill for Woodworking

A corded drill for woodworking is ideal for helping you drill holes into wood, metal, plastic and other materials. You can drill holes as wide and as thick as the drill bit that you use will allow. To drill bigger holes, you will have to but larger drill bits that your drill is compatible with. Typically, drills are compatible with any and all drill bits that can fit inside their chuck.

Drills also can help you insert screws into wood and metal, so that you can screw two metal parts together or bond wood with another material behind it. Once you run out of screws, however, you will have to buy more in order to continue using that specific drill bit. So in a way, the screws are considered an ongoing expense, whereas drilling basic holes are not technically.

Our Top 3 Corded Drill for Woodworking  2018 [Reviews]

1. BLACK+DECKER DR260C 5.2 Amp 3/8'' Drill/Driver

BLACK+DECKER DR260C 5.2 Amp 3/8 Drill/Driver

Black + Decker is a trusted name in power tools, and this is one of their more economic drills in a bright orange body. This is the most affordable drill in this review.

The DR260C has a variable speed control. You can drill from zero to 1500 revolutions per minute (RPM). This is a powerful drill with simplicity in mind.

This drill is ideal for drilling holes through wood, metal and plastic with ease. And of course, you can use this drill to screw in screws with the appropriate drill bit attached.

The size of the drill is compact, and it can fit right through narrow spaces. It weighs as light as four pounds, overall.

With its keyless chuck, you can switch bits in and out with no effort or hoops to jump through. It comes with compartments for you to store bits right onboard, and it also comes with a screwdriving bit that is double-ended. It simply gives you all that you need right out of the box.

Along with this corded drill, you also get a two-year warranty. This is a solid duration for a tool that costs so little. If you notice a problem with your drill, you could be eligible to return it and get a new one in the mail.

The biggest problem with this corded drill is the chuck. It will either permanently stay shut or widely open, incapable of taking new drill bits. You can try to pry open the chuck, but you will also risk breaking it entirely. Unfortunately, a stuck or manually broken chuck is not covered by the warranty.

Pros:

  • Comes with on-board bit storage.
  • Has variable speed control.
  • Is affordable.
  • Comes with a two-year warranty.
  • Is light in weight.
  • Has a high RPM.

Cons:

  • Chuck can get stuck in one position.

2. DEWALT DWD112 8.0 Amp 3/8-Inch VSR Pistol [Editors Choice]

DEWALT DWD112 8.0 Amp 3/8-Inch VSR Pistol

DeWalt is one of the most trusted names in construction and home improvement. This drill they have is simple, and while it is the most expensive corded drill of this review, it still is considered a steal, if your goal is just to drill holes and insert screws in applications.

This corded drill has an eight-amp motor that delivers phenomenal power and high performance. This drill can spin up to 2500 RPM, and with a variable speed control, you can trade in intense speed for a more controllable experience.

The chuck on this corded drill is keyless, so that you can exchange old bits for new ones. The chuck is made entirely of metal so that the bits are secured with every pre and post application.

The grip is very comfortable. You can use this drill for long periods of time and enjoy the soft grip without the hand getting strained in any way. This is another light, four-pound drill so that it will not weigh you down.

With the purchase of this corded drill from DeWalt, you get a three-year warranty and a money back guarantee of 90 days. They make doubly sure that you are satisfied with your purchase and that you have a product that works 100 percent.

The one flaw to this drill is that the variable speed is rather unpredictable. You can hold the trigger down and it can either speed up or slow down on its own, and this can be rather problematic if you want a consistent drill experience, either gentle or lightning fast.

Pros:

  • Has variable speed control.
  • Has a comfortable grip.
  • Comes with a three-year warranty.
  • Comes with a 90-day money back guarantee
  • Is light in weight.
  • Has a high RPM.

Cons:

  • Variable speed with change on its own.

3.PORTER-CABLE PC600D 6.5 Amp 3/8-Inch Variable Speed Dril

PORTER-CABLE PC600D 6.5 Amp 3/8-Inch Variable Speed Dril

Porter-Cable has some decent power tools, but they tend to obtain value at the expense of stability. How does this corded drill fare, though?

The 6.5-amp motor is capable of spinning the corded drill from zero to 2500 rotations per minute, which is the same as Dewalt’s with a less capable motor. This is slightly heavier than the other two drills, weighting 4.3 pounds rather than just four pounds.

This drill has a lock on button to provide you with easy control for use in extended periods of time. This can also help to ease tension and pressure on your end, which is never considered a bad thing.

You can use this corded drill to form holes in wood, metal, brick, plastic and other objects. And of course, with the right drill bit, you can insert screws where need be.

The keyless chuck on this drill makes it easy for you to exchange different drill bits, so you get have the right bit for the job at hand.

This corded drill comes with a three-year warranty. You also get one year of free service. For the price that this drill goes for, three years is very reasonable, and you will be sure that you get a product that works completely well when all is said and done.

The problem with this corded drill is the chuck. While it is not known to get stuck, it does not do a very good job holding the drill bit. The process is rather complicated to keep the drill bit intact. You will have to place the screw or screw and drill bit on the application, and then direct the drill into the drill bit like thread through a needle. It’s a lot more trouble than it is worth.

Pros:

  • Comes with a three-year warranty.
  • Has variable speed control.
  • Is light in weight.
  • Has a high RPM.

Cons:

  • Does not secure drill bits well.

What are the advantages/Benefits of Corded Drill for Woodworking?

Corded drills, firstly, all have the ability to form holes through wood and metal. Wood is a strong, durable material that you cannot penetrate without the help of a drill. It is one of the very few hard substances that you cannot puncture a hole through without shattering. This is why you need a drill to help bond wood together with another application. Drills have the ability to pierce through wood and other materials delicately without cracking or chipping it.

What is the best price for a corded drill and which brand are best for woodworking projects?

For simple drills that only drill holes and insert screws can cost in between 30 to 80 dollars. If all you need is a simple tool to do simple tasks, this is a reasonable price, as you can work on hundreds of projects with such drill. Other drills that cost 150 dollars or more come with more feature, more accessories, better performance and better hardware.

DeWalt is arguably the most well-known name in power tools. With the company being over 90 years old, each tool manufactured is proudly made in America.

Porter-Cable is a company that is even older than DeWalt, founded in New York and now headquartered in Tennessee. Even though the company has risen to success in the past few decades, their manufacturing plants have moved to Mexico and China as a result.

Black And Decker is considered a rival to DeWalt, being founded around the same time and in the same city: Towson, Maryland. At one point in the 1960s, they even owned DeWalt. Black And Decker takes pride in power tools that are light in weight, but do not skimp on performance.

Final Verdict:

These are all great, simple and cheap corded drills for woodworking, but the one that we most recommend to you is the DEWALT DWD112 8.0 Amp 3/8-Inch VSR Pistol-Grip Drill.

This was a rather easy decision for us, since it doesn’t have any known chuck issues that the other two have. Without the chuck working properly, the performance of the drill overall will work badly, if not overall. The problem this corded drill does have is that it can unpredictable speed up or slow down when you do not want it to, but this is the least concerning problem of all the three.

DeWalt however, is one of the best brands for power tools, and we do not say that without good reason. You will notice and feel a strong and sturdy corded drill once you hold it in your hands for the first time, even if it is an economical version of their more advanced line of home improvement products.

About the Author Allen A

Leave a Comment: