Best Small Drill Press [ Top 5 Picks & Buying Guide ]

    Best Small Drill Press

    Perhaps you are a handy worker who finds that his drill press is just too big to use, or maybe the work you do with your drill press is just too much for you to handle. Fortunately, there are smaller drill presses, also known as mini drill presses, that are designed for less intense work loads. These machines are easy to use, and any competent worker, man or woman, will be able to feel like a pro when using it. You can even carry them around and use them in many different areas inside or outside your home or workshop. But what is the best small drill press?

    In this review, we will show you to five small drill presses for your consideration. The companies that make these presses span from SKIL to Gino Development. They all have their share of great features, as well as some minor setbacks that consumers must either deal with or work around.

    Without further ado, here are the five small drill press we will look at on your behalf.

    Our 5 Favorite Products Compared

    Product Name





    WEN 4208 8 in. 5-Speed Drill Press

    22.9 x 7.5 x 11 inches

    8 inches

    740, 1100, 1530, 2100, 3140

    Gino Development 01-0822 0-8500 rpm 

    12 x 10 x 8 inches

    6 inches

    0 to 8500

    SKIL 3320-01 3.2 Amp 10-Inch Drill Press [Top Pick]

    21.8 x 15.2 x 9.8 inches

    12 inches

    0 to 3050

    Small Benchtop Drill Press | DRL-300.00

    12 x 10 x 8 inches

    6 inches

    0 to 8500

    SE 97511MDP 3-Speed Mini Drill Press

    12 x 10 x 8 inches

    6 inches

    0 to 8500

    Top 5 Best Small Drill Presses of 2020 - In Detail Reviewed 

    1. WEN 4208 8 in. 5-Speed Drill Press

    This first small drill press is by WEN, and they are known to make a few great power tools and devices.

    This drill press is made mostly of cast iron, which guarantees a long life of the press as well as high durability. Even with the durability that this drill press comes with, this press weighs less than two pounds.

    This motor is very durable as well, and you can adjust the drill in one of five different speeds. You can adjust it as low as 740 RPM and as fast as 3140 RPM.

    The platform can raise and lower, and you can tilt it left or right at 45 degrees, making this an easy guide to help with leveling. It also has a two-inch spindle travel.

    There is on board storage for keys, so that you can replace the chuck on the fly without having to stop and regroup.

    This small drill presses also comes with a one-year warranty. Within one year, you could get a free replacement of this small drill press if for some reason it breaks down or falters.

    Overall, this is a very flexible drill press and we like what it does, but what it does may not be enough for some owners.

    Why We Like It ?

    • The variable speeds make it versatile.
    • All the adjustable work in your favor.
    • There is a lot of durability to be had.

    Known Issue(s)

    • Horsepower is too weak.


    • We recommend only for owners who need light or hobby work done.

    2. Gino Development 01-0822 0-8500 - Best Mini Drill Press Review

    Gino Development presents us with a simple-looking drill press. It doesn’t try to be flashy or in-your-face, but it does get the job done, for the most part.

    The horsepower on this model is not known, but it can spin a drill crazy fast, at 8500 RPM. This drill press has a variable speed control, allowing you to also drill up to 5000 and 6500 RPM. Turn the knob on the side and you can adjust the speed even slower, but of course, it is variable.

    You can drill holes with this drill press that are up to six millimeters in diameter.

    This is a simple and very small drill press, making it very portable. It is a very small machine, and it definitely has its limits when it comes to what you can use with it.

    The motor is the Achilles heel of this mini drill press. It is unstable and is known to heat up. While it works well, we fear that it may not work for much longer if we continue to use it on a regular basis.

    Why We Like It ?

    • It is smaller and even more portable.
    • Has a variable control speed.
    • Has a high RPM.

    Known Issue(s)

    • The motor is on borrowed time. You can’t run it for more than a few seconds.
    • Might be too small for some workers.


    • This is a great drill press to have as a backup, but not as a primary tool for daily use.

    3. SKIL 3320-01 3.2 Amp 10-Inch - Best Small Drill Press

    SKIL is a very well known company that makes quality tools that are as equal as, if not more than, DeWalt when it comes to efficiency.

    This drill press comes with a laser sight in order to help you see the spot where you drill before you drill it. This is basically unheard of for small and mini drill presses, and they are often found in newer and larger models.

    Like the first drill press from Wen, the table can be raised and lowered, and you can tilt it right or left at 45 degrees for beveling. If you want most closure or versatility, it is definitely there.

    There is on board storage for keys, so that you can replace the chuck on the fly without having to stop and regroup.

    You can operate this drill press in one of five speeds. It has variable speed control, so you can drill up to 570 RPM or 3050 RPM.

    With this drill press you have not just a one-year warranty, but a 30-day money back guarantee. To put it simply, if you’re not happy with your purchase, or you have something wrong with your drill press, you are given a window for SKIL to make things right for you.

    What we do not like about this drill press is that it is heavy. One other feature of this best mini drill press Weighing over 50 pounds, this works like a nice machine, but it is also very tough to carry with you somewhere, even though it still can be done.

    Why We Like It ?

    • The variable speeds make it versatile.
    • Has a variable control speed.
    • The laser sight makes pinpointing holes to drill easy.
    • Has a one-year warranty and a one-month money back guarantee.

    Known Issue(s)

    • The drill press overall is very heavy.


    • Exercise a good way to pick in drill press up in the event that you want to have it moved.

    4. Small Benchtop Drill Press | DRL-300.00  Review

    This next small drill press is from EuroTool. If we didn’t know any better, we’d say that it is the exact same drill press that Gino Developments sells. It’s a simple looking drill press with a lot of power.

    At 8500 RPM, this is the fastest drill press in this review. This drill press also contains a variable speed control, which lets you to also drill up to 5000 and 6500 RPM, respectively. You can limit how fast the drill spins by simply adjusting the knob, and it will go slower. Once again, it’s a simple machine.

    You can drill holes with this drill press that are up to six millimeters in diameter.

    It has a small lightweight size, small enough to fit in the palm of the hands of a very large man.

    Once again, the motor is rather unstable. Even if you operate this motor at a steady RPM, it heats up very fast. We feel as if the motor was repurposed from a different kind of machine and used for this drill press. Power isn’t everything, and you also need control and stability, too.

    The one extra thing is the one-year warranty, but they won’t honor it if you simply burn the motor out. Regardless, the warranty can still come in handy if you use it well and it still breaks down for another reason.

    Why We Like It ?

    • It is smaller and even more mobile.
    • Has a variable control speed.
    • Has a high RPM.
    • Backed by a one-year warranty.

    Known Issue(s)

    • The motor is on borrowed time. You can’t run it for more than a few seconds.
    • Might be too small for some workers.


    • This is a great drill press to have as a backup, but not as a primary tool for daily use.

    5. SE 97511MDP 3-Speed Mini Drill Press

    Once again, it’s the same drill press that Gino Technologies also sells. They claimed to have made some minor tweaks to make it their own, but it is essentially the same product as EuroTool and Gino.

    It has variable speed control, and it can drill up to 5000, 6500 and 8500 RPM, depending on the speed setting that you have it on. This is insanely fast.

    This drill press has a three-year warranty. Originally, it starts out as a two-year warranty, but upon registering your product with SE online, that two years turns into three. With this warranty, this is already the third best drill press in this review.

    This is known as a compact drill press. It is light, and you can easily carry it with you for use anywhere that you desire. Ideally, you would like to have a light drill press if you are expecting to use it in different locations.

    However, this drill press is simply too fast, and does not come with anything else to help stabilize it. It’s a limited drill press, and if all it has going for it is a rocket-fuel RPM, we can’t say that it’s a professional product that is built to last.

    Why We Like It ?

    • It is smaller and even more portable.
    • Has a variable control speed.
    • Has a high RPM.
    • Backed by a three-year warranty.

    Known Issue(s)

    • The motor is on borrowed time. You can’t run it for more than a few seconds.
    • Might be too small for some workers.


    • This is a great drill press to have as a backup, but not as a primary tool for daily use.

    General Advice : How To Choose The Right Small Drill Press

    When buying a small drill press, there are many factors to take into consideration. These are found in every drill press and very from favorable to unfavorable, depending on your personal preferences.


    Small drill presses are generally miniature and portable, but even so, these drill presses are not all the same size. Some owners prefer a slightly big version of a small drill press so that they are afforded more comfort, as working with small drill presses can really cramp their hands up. Smaller than average drill presses, on the other hand, will be lighter and easier to carry. They can also occupy far less space on your workbench.


    Small drill presses generally are not heavy machines at all. Some are tabletop drill presses, while others can be clamped to the lip of a workbench or table. Table top drill presses allow you to move the press around the table. Clamped drill presses keep the drill press at one spot, so it has no chance of moving as you are operating it. If you know exactly what kind of surface you want to use a small drill press for, you will be more inclined to purchase the right one for you.


    Many small drill presses are equipped with a stable base to help them work efficiently and accurately. Stabilization is important for every drill press, and one design flaw that many manufacturers overlook is building a press that is too tall for its base. You would like to have a small drill base that has a non-slip base, so that it doesn’t move on its own. It also should not be able to fall over for either being too tall or the base being too small for it.


    Small drill presses are known for having better accuracy than their larger counterparts. With a miniature drill press, you can be as accurate as 1/64 inches. If you need something accurate, many small drill presses should be fairly decent in delivering results in this department.


    The swing of a drill press is known as the distance between the surface and the tip of your drill bit that you are using. This distance should be right for the size of your application that you generally drill holes into. Small applications will normally work fine, but larger applications will require more clearance in order for you to be able to drill into it.

    What Are The Advantages And Disadvantages Of Using A Small Drill Press?

    Compared to larger drill presses, small drill presses are very portable and light in weight. Small drill presses, due to their lack of weight, are far less dangerous to handle compared to larger drill presses.

    Because the machine is portable, it will always include a supportive base that also is used for the drilling surface in which you would be able to work on various applications. This makes it ready to go for any job either in your garage, in your kitchen, at work or on the go. Carrying around these drill press are not difficult at all, and can be held in your hands for easy transportation.

    Small drill presses are also known for their better, pinpoint accuracy that most of the normal drill presses cannot replicate. They allow you to use smaller drills that you might need for more delicate applications, which many workers will have to work with sooner or later.

    But because of the size of the drill press, you have to work with a smaller throat capacity, and are likely only able to use smaller applications only. This means you have a limit to how big of objects you can place inside of it. If you have rather small projects, small drill presses will be idea. Larger project more than likely warrant regular drill presses.

    Click Here Video How To Use A Drill Press

    Final Verdict: 

    The best small drill press that you should set your sights on is the SKIL 3320-01 3.2 Amp 10-Inch Drill Press.

    This was really just a two-horse race between SKIL and Wen. The other three drill presses are basically the same, with a motor that is just too unstable to be used on a consistent basis. You honestly do not need 8000 RPM, and you need a lot of control for a drill that fast to work accurately.

    SKIL gets the advantage over Wen’s drill press for having a more beefy motor and a laser light guide in order to better help you locate where you want your drilling to go. While this drill press is quite heavy, it still is possible for you to move and transport around, and odds are, 50 pounds is something you are capable of lifting. That is why Skil’s small drill press is our top choice.

    Frequently Asked Questions

    1. How do you build a drill press?

    • Assemble the required materials.
    • Make the column and connect it to the base by fastening a bolt at the drilled hole to hold them in place.
    • Cut several pieces of wood to create the cube and spacers.
    • Assemble the piece around the column.
    • Make the feet and attach at the base.
    • Attach the drill to the cube.
    • Add an extension cord.

    2. What determines the size of a drill press?

    Ans: The size of a drill press is determined by the throat capacity of the drill. Throat capacity refers to the space between the column of the drill press and the center of the spindle. Also known as the swing, it determines how extended a diameter the drill press can handle.

    3. Can I use a drill press as a milling machine?

    Ans: Yes. a drill press can be used as a milling machine. However, should you choose to do so, you need to observe absolute caution always. Injuries arising from deciding to use a drill as a milling machine can be quite fatal, the likes of losing several fingers from a single miscalculation.

    4. How do you secure a drill press?

    • Inspect the surface over which the drill will be stationed to ensure it is levelled for stability.
    • Carefully mount the base on the working area to prevent falling.
    • Properly secure the motor head to the column.
    • Lock the drill bit in the chuck and take out the chuck key.
    • What are the safety rules for a drill press?
    • Apply the correct cutting fluid for the material you drill.
    • Take out chips using a brush and not by hand.
    • Always fasten your work on the drill table.
    • Employ properly ground drill bit based on the material of work.
    • Operate drill at recommended RPM for bit diameter and material of work.

    6. What PPE is required when operating a drill press?

    Ans: When operating a drill press, the most recommended PPE is shatter-proof safety glasses for one’s eyes. The eyes are the most susceptible to injuries whose damage can be irreversible. These eye injuries could be caused by loose metallic specs that fly off from beneath the drill during drilling or cleaning.

    7. How do you change the speed of a drill press?

    • Unplug the drill press.
    • Remove the pulley cover.
    • Using a wrench, alter the motor tension.
    • Refer to the chart on the inside of the pulley cover for appropriate belt positioning.
    • Position the belt for desired speed.
    • Return the pulley cover.
    • Fasten the drill.

    About the Author Allen A

    Allen A. Jones is a specialized technician of electronic appliances. He has been working with Bestbuy since 2015 and helped thousands of customers to choose the right electronic gadgets offline. Now he is doing the exact same thing online. To know more about him, get in touch with him on Allen[at]

    follow me on:

    Leave a Comment: